For inclined or indexed conveying applications, INO Process and Conveyor Belts can be fitted with cleats. These are welded directly onto the belt surface.
Limitations: Maximum belt width: 1,000 mm (for wider belts, a double-weld must be made) Minimum belt length: 1,500 mm At minimum pulley diameter, both the profile and the belt must be taken into consideration. Always the higher value counts. Only cleats made of thermoplastics can be applied using high-frequency welding machines. Transverse profiles are generally applied at right angles to the belt edge. Other arrangements are available upon request. For felt and fabric belts, cleats can be made from the same belt material and then glued onto the belt. Cleats for rubber belts are glued onto the belt surface.
For many decades, Bode Belting has been a competent solution provider for the manufacture and application of plastic conveyor belts, timing belts and coatings. more...
ATLATOS® – The Timing Belt is a Bode Belting GmbH brand and is made in Lauenburg, Germany. more...
INO Process & Conveyor Belts are a Bode Belting brand and have stood for high quality and customisation since 1968. more...
Bode Belting GmbH
T +49 (0)4153 - 55 095 -0
F +49 (0)4153 - 55 86 -75